A lot of enterprises hope to be able to simplify the processing problem of fluid of the cutting in machining a process, and more important is how to satisfy this kind of desire. With what machining center to go producing imperative bronze part? With the applicable machine tool of applicable cutting oil? the daily production plan with respect to machine tool user, they are very familiar to this problem. First issue is, applicable machining center must be found inside short time. Still need to consider the cutting liquid that uses on the machine tool next applicable perhaps need to change. Because not be any cutting oil,suit to process a variety of different data. To be located in for the Motorex company of Swiss Langenthal, since oil of Ortho NF-X cutting comes out, this has become the past. No matter be tall alloy steel, nonferrous metal, aluminous,still be cast-iron, oil of this kind of cutting is applicable (graph 1) . Graph cutting of 1 use Ortho NF-X is oily, use as even if the 7 big reasons that the stannic zinc bronze of sanitary equipment fittings also can machine use Ortho NF-X reliably can make place develops his with the machine tool the largest dominant position, for the manufacturer that processes different material product with different batch to frequent ground, the sense is extraordinary. Nowadays, the date of delivery that offers by the client previously asks, had made a kind of special requirement, and target of sale of this pairs of successful implementation has conclusive effect. Ever when why, a variety of situations that machine fluid inventory disorder will become the past eventually. The fluid of cutting of Swisscut Ortho NF-X of Motorex company, already stepped the first pace to right way. Fluid of Ortho NF-X cutting is a kind of derive the general cutting at Vmax is oily. The attention dot when developing Ortho NF-X is: Improve productivity, lengthen cutting tool life to reach can obtain first-rate to machine a result. Meanwhile, the user also can realize the profit that uses this product. Cutting oily manufacturer used a problem to advance 7 good points with respect to Ortho NF-X. Graph 2 use Motorex Vmax technology, OK and very good favourable geographical position uses the heat of the generation in treatment, optimize cutting parameter, raise productivity Vmax technology to be able to reduce cost this kind of cutting is oily: ■ the treatment that can be used at any material; ■ can obtain wonderful treatment effect to be able to shorten the handling time of workpiece; ■ because prolonged cutting tool life, reduced manufacturing cost thereby; ■ taste is small, slight and muddy, do not contain heavy metal and chloric; ■ workpiece can be cleaned directly, speed is fast, sheer; ■ used new additive technology, do not have an influence to coating, paint, sealed material or nonferrous metal; ■ the detailed account of index of ill other people according to Bosch, Daimler and VDA, it is the good product that produces medical treatment equipment. The statistical number according to MotoreX him company, vmax technology already established new milepost for the progress of cutting craft. The heat that it still can use the generation in machining a process is right the treatment process when be being produced with top speed produces positive effect (graph 2) . To assure to make assemble of quantity of heat is inside affirmatory area, used a kind so called " grind adjuster " , will restrict the assemble that grind and heats up. Because Ortho NF-X can offer the additive that fills up evenly, the user can be benefited from inside the technology of overlay chemistry, and can improve productivity. Use this one technology, the interaction of material of 12 kinds of above can optimize machinability and watch and machine quality. CNC MillingCNC Machining